I’d Kill to me your valentine - SUBLIMATION TRANSFER
I’d Kill to me your valentine - SUBLIMATION TRANSFER
This listing is for a SUBLIMATION TRANSFER
1). Sublimation Transfers require garments that are at least 50% polyester or higher and the garments must be light colored or white. If pressing on a mug or another blank, please ensure that your blank is a blank for sublimation.
2). Sublimation transfers are pressed on garments at 400° for 60 seconds. If pressing a blank, please check that manufacturers recommendation for pressing times.
To apply:
-Roll a lint roller over your item to remove any loose fibers or lint. These fibers can turn blue during the process and are permanent.
-Pre press your garment to remove any moisture
-Press transfer accordingly (400° for 60 seconds MEDIUM PRESSURE or the manufacturer’s directions.)
-Hot Peel
3). Transfers are printed on 8.5x11” paper. Please note, if you select a design that is more tall than it is wide, it will not be very wide. The designs are sized accordingly with photoshops recommended dimensions.
4). Transfer Sizing:
Sheet of 6 transfers: 3x3”
Four Sack: 4”
Infant/Toddler: 5.5”
Youth: 7”
Adult: 8-10”
*Sizing is per the longest side of the design*
5). Recommendations:
-We recommend using a heat press to use these transfers.
-DO NOT USE A TEFLON SHEET!!
-Butchers paper or
-We also suggest cutting the transfer as close as possible to the design to help reduce the chance of transfer sheet marks.
-Amazon carries heat tape which is awesome for keeping the transfer in place!
Care Instructions
Care Instructions
Share
Reminders...
- Tat Is Currently 1-14 Business Days.
- Custom Tat Is 1-28 Business Days.
- Preorders are 1-28 Business Days.
- Everything is Made To Order.
- Transfers Tat 1-3 Business Days.